DELITE's Filter Presses separate liquids and solids by forcing the liquid fraction of a feed slurry through permeable filte cloth. The separation takes place in chamber formed between the recessed faces of plates, which have been clamped together in a heavy duty structure.
The Molded filter plates are formed with corrugated drainage surfaces in the chamber recesses and ports for slurry with a Hydraulic Ram. Slurry is pumped under high pressure, filling the solids. When no more solids can be forced into the chambers, the feed pumps are turned off and compressed air is used to remove interstitial waterfrom pores in the filter cake. When the desire residual moisture content has been achieved the filter is opened, cake is removed and the procedure is repeated.
POLYPROPYLENE, STAINLESS STEEL & IRON
1500mm x 1500mm - 610mmx 610mm
1200mm x 1200mm - 470mm x470mm
1000mm x 1000mm - 305mm x 305mm
800mm x 800mm
760mm x 760mm
CHOICE OF FILTER PRESSURE:
Thick and thin webs on chamber plates for 100 psi (7 bar) and 225 psi (15 bar) Operation.
APPLICATIONS:
Sewage Treatment Plants, Water Treatment, Chemical Processing industrial Minerals, Ceramics, Food & Beverage.
FILTER PLATES.
Size from 470 x 470 to 1200 x 1200 Polypropylene, Stainless Steel & Cast Iron Recessed Plates. Check Nuts for Filter Plates suitable for every plates in Polypropylene & Gun Metal Filter Cloths Sizes from 470 x 470 to 1200 x 1200 Tailored to suitindividual requirements in a range of fabrics.
HYDRAULICS:
?All Hydraulic spares available, including cylinder seal kite, filters, valves, etc.